')

Drill Bits World


Proudly serving our customers for over 10 years.



 

Straight Flute

Straight Flute
Straight Flute
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$44.83
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$20.23
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$60.00
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$44.83
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$19.64
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$63.34
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$41.89
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$20.23
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$63.34
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$41.89
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$19.64
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$63.34
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$41.89
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$23.03
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$55.08
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$41.89
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$20.42
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$74.25
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$39.67
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$26.03
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$78.03
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$39.67
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$27.27
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$80.06
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$44.96
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$32.36
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$80.06
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$38.43
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$30.93
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$81.57
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$36.28
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$37.91
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$89.99
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$36.28
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$38.82
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$93.55
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$36.47
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$47.63
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$95.29
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$36.47
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$41.43
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$96.68
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$34.58
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$54.42
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$99.60
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$34.58
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$54.16
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$100.46
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$34.58
The straight flute design of these Solid Carbide drills increases edge strength produces good size control and hole surface finish. The 140? split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys chrome alloys steel weldments titanium alloys high temperature alloys and stainless steel weldments.
$58.59
Powered by Fortune3