Drill Bits World


  



Reamers
A reamer is a type of rotary cutting tool used in metalworking. Precision reamers are designed to enlarge the size of a previously formed hole
Reamers  

Repairman's Reamers | High Speed Steel
MR54571 - Repairman's Reamers | High Speed Steel

Repairman's Reamers | High Speed Steel

A popular steel reamer for removing burrs or enlarging small holes in soft metals, plastics and similar material.
Price: Add to cart for price

Nitro Safety First Construction Reamers
4290N - Nitro Safety First Construction Reamers

Nitro Construction Reamers | Hex Nut Shank | High Speed Steel

Black & Gold | Spiral Flute | Hex Nut Shank | Car Length | Spiral Flute

Manufactured from a premium grade of M-7N molybdenum high speed steel. These High Speed Steel, Hex Nut Shank, Heavy Duty Construction Reamers has a Ferritic Nitro Carburizing surface treatment, that gives a hard, protective layer to the reamer, which increases hardness (Rc 75-80) without increasing brittleness, which is measurably harder than high speed steel. Body and clearance are gold and black surface treated for maximum lubricity. Construction or Car reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies. These High Speed Steel, Hex Nut Shank, Heavy Duty Construction Reamers are tapered at the point to facilitate entering of holes which are out of alignment.
Price: Add to cart for price

Bridge Reamers | Straight Flute
4200 - Bridge Reamers | Straight Flute

Bridge Reamers | Taper Shank | High Speed Steel

Black, Straight Flute

Our High Speed Steel Taper Shank Bridge Reamers are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. High Speed Steel Taper Shank Bridge Reamers have pilot type points for alignment purposes and easy entry into small and off-center holes.
Price: Add to cart for price

Bridge Reamers | Spiral Flute
4250 - Bridge Reamers | Spiral Flute

Bridge Reamers | Spiral Flute | High Speed Steel 

HSS, Black, Spiral Flute, Taper Shank

Our High Speed Steel, Spiral Flute, Bridge Reamers are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. High Speed Steel Bridge Reamers that are of Spiral Flute have pilot type points for alignment purposes and easy entry into small and off-center holes.
Price: Add to cart for price

Construction Reamers | Spiral Flute
4275N - Construction Reamers | Spiral Flute

Construction Reamers | Spiral Flute | High Speed Steel

Nitro | Black & Gold | 3-Flats

High Speed Steel, Spiral Flute, Construction Reamers are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Combination black and gold finish, for improved lubricity, corrosion resistance, and to reduce chipping or flaking. These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High Speed Steel, Spiral Flute, Construction Reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies.
Price: Add to cart for price

Construction Reamers | High Spiral Flute
4285N - Construction Reamers | High Spiral Flute

Construction Reamers | High Spiral Flute | High Speed Steel

Nitro | Black & Gold | 3-Flats

Our High Spiral Flute | High Speed Steel | Construction Reamers are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Combination black and gold finish, for improved lubricity, corrosion resistance, and to reduce chipping or flaking. These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Our High Spiral Flute | High Speed Steel | Construction Reamers is especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies.
Price: Add to cart for price

Straight Flute | Taper Pin Reamers
TPR3012 - Straight Flute | Taper Pin Reamers

Straight Flute | Taper Pin Reamers | For Reaming Holes

High-Speed Steel | Right Hand

• These Taper Pin Reamers are used for reaming holes into which standard taper pins will fit.
• Manufactured with a taper of 1/4" per foot.
• The straight flute design draws chips back toward power source.
• Spiral point used for hand reaming of difficult-to-ream materials.
• Helical flute reamers are suitable for use in machine reaming, because they throw chips forward.
• These Straight Flute, Taper Pin Reamers, are suitable in a variety of normal ferrous, non-ferrous and non-metallic materials.
Price: Add to cart for price

Spiral Flute - Taper Pin Reamers
TPR4013 - Spiral Flute - Taper Pin Reamers

Taper Pin Reamers | Spiral Flute | For Reaming Holes

High-Speed Steel | Right Hand

• These Taper Pin Reamers that are of Spiral Flute are used for reaming holes into which standard taper pins will fit.
• Manufactured with a taper of 1/4" per foot.
• The straight flute design draws chips back toward power source.
• Spiral point used for hand reaming of difficult-to-ream materials.
• Helical flute reamers are suitable for use in machine reaming, because they throw chips forward.
• These Taper Pin Reamers that are of Spiral Flute are suitable in a variety of normal ferrous, non-ferrous and non-metallic materials.
Price: Add to cart for price

Helical Flute | Taper Pin Reamers
TPR5016 - Helical Flute | Taper Pin Reamers

Taper Pin Reamers | Helical Flute | For Reaming Holes

High-Speed Steel | Right Hand

• These Helical Flute Taper Pin Reamers are used for reaming holes into which standard taper pins will fit.
• Manufactured with a taper of 1/4" per foot.
• The straight flute design draws chips back toward power source.
• Spiral point used for hand reaming of difficult-to-ream materials.
• Helical flute reamers are suitable for use in machine reaming, because they throw chips forward.
• Suitable in a variety of normal ferrous, non-ferrous and non-metallic materials.
Price: Add to cart for price

9 Items Found in Reamers     
Powered by Fortune3