Fractional | Black Oxide | 135 Degree Split Point | Straight Shank
Our Aircraft Extension Drill Bits are manufactured to NAS 907 Type C specifications, 135 degree split point, surface treated with jobber flute lengths for drilling holes in hard to reach places. Heavy duty construction for portable or machine drilling in high tensile strength alloy steels.
• High speed steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and nonferrous materials.
• Oxide coating prevents chip building, galling and welding on the workpiece. It is commonly used on low carbon metals, stainless steel and ferrous metals.
Micrograin Solid Carbide | Heavy Duty | 118 Degree Split Point | Fractional Sizes
• Solid carbide drills offer advantages of greater rigidity and closer tolerance in difficult-to-machine materials
• Withstands high drilling speeds, temperatures and continuous abrasion
• For materials such as cast iron, aluminum casting, non-ferrous alloys, hard plastics, rubber, and other abrasive materials
Fractional Sizes | 180 Degree Point | Made in the USA
• Our Taper Shank Drills High Speed Steel Black Oxide Drills with conical shanks suitable for direct fitting into tapered holes in machine spindles, driving sleeves or sockets Tapered shank drills generally have a tang.
• These High Speed Steel, Black Oxide drills are made to fit Morse tapered holders, taper shank drills are made to American National Standard dimensions.
• Designed to give maximum performance in drilling many different materials, under a wide range of applications
• Our Pilot Point Jobber Drills up to four times faster than regular point drill bits.
• Drills precise, smooth holes without burrs.
• Our 3/8" Shank Pilot Point Jobber Drills minimizes walking – no center punch required.
• No binding or lock-up at break-through.
• Requires half the force of regular point drill bits.
• 3/8" Shank
These carbide tipped nitro masonry drills are used to drill granite, marble, concrete, super concrete, polyester glass, reinforced products and hard steels of all types.
For Precision Drilling In Woods, Plastics, Composites
Features:
• Precision cutting spurs enable clean, splinter-free holes.
• Center point permits precision targeting
• Use on all types of wood.
• Super Wear Resistant
Number | Bright | 118 Degree Point | Straight Shank
Solid Carbide drills have the ability to retain hardness and a sharp edge at high temperature, plus its excellent abrasion-resistant qualities, makes it advantageous for use in drilling abrasive materials, such as cast iron, the non-ferrous alloys, high silicon aluminum, hard rubber and plexiglass. Carbide drills are generally run at higher speeds than high speed steel drills. They offer the advantage of extreme rigidity for greater drilling accuracy.
Annular Cutters | High Speed Steel | Fractional Sizes
1" Depth of Cut | 3/4" Diameter Shank
9100SE Annular Cutters w/Pins HSS, Cutter with Pin
Broach cutting using Drill Bits World High Speed SteelFractional Size Annular Cutters cutters means you can produce large diameter holes efficiently and quickly with less energy, faster penetration and less thrust. Rather than drilling out the metal with a solid drill, Drill Bits World cutters removes only the periphery of the hole, ejecting a slug at the end of the cut. Tests show that a solid drill will take 3 minutes, 45 seconds to drill a 1-1/4 inch hole in 3/4 inch plate. A Drill Bits World cutter can do the same job in 35 seconds.
• Allows user to drill through concrete-embedded rebar
• Eliminates need to relocate holes.
• Prevents breaking or shattering of hammer bits
• Use in 1/2" capacity or larger drill motor with a three jaw chuck and no load speed of 440 RPM
118 Degree Point For drilling holes in hard to reach places.
These extra length high speed steel drills are of heavy duty construction for portable or machine drilling in high tensile strength alloy steels. These long drill bits are utilized in deep hole or long reach drilling applications in many kinds of materials for either many kinds of materials for either hand held or fixed spindle use. hand held or fixed spindle use.
Solid Carbide Three Fluted Drills | 150 Degree Point
Made in the USA | Fractional Sizes
• 3 flute solid carbide drills can produce smooth straight cuts which may reduce the need for reaming .
• The 150° self-centering point eliminates the need for spot drilling.
• Can be used for core drilling.
• Applications include titanium, cast iron, high silicon low alloy steel and non-ferrous metals.
• Our Fractional, High Speed Steel, Straight Shank Taper Length Drills are for general purpose drilling in operations that require a length longer than jobber drill length
• Designed to perform well in a wide range of materials in the iron and steel families
• Taper length drills are general purpose drills with increased cutting length.
• They are manufactured with straight shank of the same diameter as that of the flute diameter.
• Taper length drills derive their name from having the same flute lengthas taper shank drills.
• Our Tungsten Solid Carbide Tipped Hole Cutters are for cutting construction steel plate, stainless steel, iron, aluminum, copper, cast iron and plastics.• Ultra-hard tungsten carbide teeth have excellent wear and heat resistance.
• One piece construction requires no assembly and provides stable, accurate drilling.
• HSS Pilot drill and ejector spring are standard, ejects plug automatically after cutting.
• Safety collar stop prevents over-penetration of workpiece.
• Three-flatted shank for firm chucking.
• the Our Tungsten Solid Carbide Tipped Hole Cutters cuts dry, use MEGACUT® cutting fluid for even cleaner, precise cuts.
• Produces burr-free holes.
• Depth of cut up to 3/16"
Blitz Bits | 1/2 Inch Reduced Shank | High Speed Steel | 118 Degree Split Point
3 Flats on Shank, Black & Gold Finish, Silver & Deming Drills
Features:
Engineered for heavy duty work, these Reduced Shank, High Speed Steel, Silver & Deming BLITZ BITS are high performance drills for production and tough maintenance applications. Made from a premium grade of M-7 molybdenum high-speed steel, which has a special black and gold surface treatment to increase lubricity and reduce friction. Strong web construction provides greater strength and rigidity to drill in hard-to-drill materials like stainless steel and titanium alloys.
• Recommended for drilling in hardened steel and abrasive materials.
• The high rigidity of the drill enables it to drill a close tolerance hole.
• Ideal for drilling materials with short, powdery chips.
• Made in USA.
• High speed steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and nonferrous materials.
• Oxide coating prevents chip building, galling and welding on the workpiece. It is commonly used on low carbon metals, stainless steel and ferrous metals.