• High speed steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and nonferrous materials.
• Oxide coating prevents chip building, galling and welding on the workpiece. It is commonly used on low carbon metals, stainless steel and ferrous metals.
Micrograin | 118 Degree Split Point | Wire Gauge Sizes
• Solid carbide twist drills that are of heavy duty are drills that offer advantages of greater rigidity and closer tolerance in difficult-to-machine materials
• Withstands high drilling speeds, temperatures and continuous abrasion
• These heavy duty solid carbide twist drills are perfect for materials such as cast iron, aluminum casting, non-ferrous alloys, hard plastics, rubber, and other abrasive materials
Our High Speed Steel, Spiral Flute, Bridge Reamers are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. High Speed SteelBridge Reamers that are of Spiral Flute have pilot type points for alignment purposes and easy entry into small and off-center holes.
Solid Carbide, Bright Finish, 140 Degree Split Point
The straight flute design of these Solid Carbide drills increases edge strength, produces good size control, and hole surface finish. The 140 Degree split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys, chrome alloys, steel weldments, titanium alloys, high temperature alloys, and stainless steel weldments.
Annular Cutters | Quality High Speed Steel | Fractional Sizes | 2" Depth of Cut | 1-1/4" Diameter Shank
Broach cutting using Drill Bits World High Speed Steel, Fractional Sizes, Annular Cutters means you can produce large diameter holes efficiently and quickly with less energy, faster penetration and less thrust. Rather than drilling out the metal with a solid drill, Drill Bits World Annular Cutters removes only the periphery of the hole, ejecting a slug at the end of the cut. Tests show that a solid drill will take 3 minutes, 45 seconds to drill a 1-1/4 inch hole in 3/4 inch plate. A Drill Bits World cutter can do the same job in 35 seconds.
Straight Shank | 118 Degree Point For drilling holes in hard to reach places.
Heavy duty construction for portable or machine drilling in high tensile strength alloy steels. These drills are utilized in deep hole or long reach drilling applications in many kinds of materials for either many kinds of materials for either hand held or fixed spindle use. hand held or fixed spindle use.
• Bright Finish
• High Speed Steel Body
• These Carbide Tipped Jobber Drills, Wire Size drills resist abrasion and retain edge sharpness
• Recommended for drilling in cast iron, aluminum castings, hard plastics and other abrasive nonferrous materials
• These Carbide Tipped Jobber Drills, Wire Size drills should not be used in soft materials
Aircraft Extension Drill Bits | High Speed Steel | 12 Inches in Length
Fractional | Black Oxide | 135 Degree Split Point | Straight Shank
Our aircraft extension drills are manufactured to NAS 907 Type C specifications, 135 degree split point, surface treated with jobber flute lengths for drilling holes in hard to reach places. Heavy duty construction for portable or machine drilling in high tensile strength alloy steels.
1/16" thru 19/64" - 6 per pack
5/16" thru 1/2" - 3 per pack
• High speed steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and nonferrous materials.
• Oxide coating prevents chip building, galling and welding on the workpiece. It is commonly used on low carbon metals, stainless steel and ferrous metals.
Heavy Duty Super High Speed Steel | 1/2" Reduced Shank | 118 Degree Split Point | 3 Flats on Shank | Straw Gold Finish
• Our Cobalt M42Silver and Deming Drills are manufactured from heat-resistant cobalt M42 high-speed steel to maintain cutting ability at temperatures exceeding 1000 Degrees F • Silver and Deming drills are ideal for portable drilling and drill presses, where the maximum chuck capacity is 1/2" • Used extensively in machine shops, maintenance departments, garages and body shops • Also popular in screw machining centers where a short, rigid drill is desirable
High-Speed Steel Body | Right Hand Cut | Straight Flute | 118 Degree Point
• Also known as a “Hard Steel Drill”.
• Our Carbide Tipped Die Drills are recommended for drilling hardened and case hardened steel over 45RC hardness.
• Can produce a reamer finish.
• Drill body diameter is smaller than the carbide tip to prevent material galling.
Magnum Solid Carbide | Straight Shank | Number Sizes
Number Sizes, Bright Finish, 140 Degree Split Point
These Magnum Solid Carbide Straight Shank drills increases edge strength, produces good size control, and hole surface finish. The 140 Degree split point provides ease of penetration. Magnum Solid Carbide Straight Shank drills are used to drill difficult materials (up to Rc 60) including nickel alloys, chrome alloys, steel weldments, titanium alloys, high temperature alloys, and stainless steel weldments.
118 Degree Point For drilling holes in hard to reach places.
These HSS, Straight Shank, Extra Length Drill Bits are of heavy duty construction for portable or machine drilling in high tensile strength alloy steels. These drills are utilized in deep hole or long reach drilling applications in many kinds of materials for either many kinds of materials for either hand held or fixed spindle use. hand held or fixed spindle use.
SDS BOOSTER MAX HEAD - The head has six cutting edges which make it highly efficient. The six cutting edges perfectly guide the drill bit which makes the drilling effort more progressive and increases the penetration speed. The BOOSTER MAX head reduces vibration therefor increases the comfort of drilling.
Annular Cutters | Quality High Speed Steel | Fractional Sizes | 3" Depth of Cut | 3/4" Diameter Shank
Broach cutting using Drill Bits World high speed steel, 3" depth of cut annular cutters means you can produce large diameter holes efficiently and quickly with less energy, faster penetration and less thrust. Rather than drilling out the metal with a solid drill, Drill Bits World cutters removes only the periphery of the hole, ejecting a slug at the end of the cut. Tests show that a solid drill will take 3 minutes, 45 seconds to drill a 1-1/4 inch hole in 3/4 inch plate. A Drill Bits World cutter can do the same job in 35 seconds.
AE60786 -
Aircraft Extension Drills 12" OAL - Letter Sizes A Letter Size x 12" Overall Length - The Aircraft Extension Black Oxide Finish Drills are Manufactured to NAS 907 Type C specifications 135 degree split point surface treated with jobber flute lengths for drilling holes in hard to reach places. Heavy duty construction for portable or machine drilling in high tensile strength alloy steels. For drilling applications where extra length for reach is required. The flute length on these drills is the same as a standard jobber drill. 135 degree split point is self-centering and reduces thrust. Pouched. 6 Per Pack.
High Speed Steel, Spiral Flute, Construction Reamers are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Combination black and gold finish, for improved lubricity, corrosion resistance, and to reduce chipping or flaking. These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High Speed Steel, Spiral Flute, Construction Reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies.
Solid Carbide, Bright Finish, 140 Degree Split Point
The straight flute design of these Solid Carbide drills increases edge strength, produces good size control, and hole surface finish. The 140 Degree split point provides ease of penetration. Straight flute Solid Carbide drills are used to drill difficult materials (up to Rc 60) including nickel alloys, chrome alloys, steel weldments, titanium alloys, high temperature alloys, and stainless steel weldments.
Carbide Tipped | For Small Rotary Hammers | With 4-Slot SDS Drive System
• Patented reinforced flute geometry reduces vibration and channels debris quickly away from the hole.
• Versatile 4-slot drive system hammer bits fit most SDS-Plus rotary hammers.
• Chisel shaped head geometry is self-centering and ensures fast penetration.
• Head design to prevent shattering in the event of contact with reinforced steel and concrete.
• High temperature vacuum brazing with pure copper ensures heavy duty tip capability and withstands hard aggregate shocks.
• Shot-peened finish.
• Made to ANSI standards.
• Drills stamped with insignia satisfy the strict quality control tolerances and specifications of the German Institute for Bautechnik, Berlin.
• For use in concrete, stone, masonry, solid brick, cement board and aggregates.
• Tubed.