135 Degree Split Point | Black Oxide & Gold Finish
Engineered for heavy duty work, These Reduced Shank Drills, Jobber Length, BLITZ BITS are high performance drills for production as well as tough maintenance applications. Made from a premium grade of M-7 molybdenum high-speed steel, which has a special black and gold surface treatment to increase lubricity and reduce friction. The strong web construction provides greater strength and rigidity to drill in hard-to-drill materials like stainless steel and titanium alloys.
Nitro Construction Reamers | Hex Nut Shank | High Speed Steel
Black & Gold | Spiral Flute | Hex Nut Shank | Car Length | Spiral Flute
Manufactured from a premium grade of M-7N molybdenum high speed steel. These High Speed Steel, Hex Nut Shank, Heavy Duty Construction Reamers has a Ferritic Nitro Carburizing surface treatment, that gives a hard, protective layer to the reamer, which increases hardness (Rc 75-80) without increasing brittleness, which is measurably harder than high speed steel. Body and clearance are gold and black surface treated for maximum lubricity. Construction or Car reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies. These High Speed Steel, Hex Nut Shank, Heavy Duty Construction Reamers are tapered at the point to facilitate entering of holes which are out of alignment.
Smaller Shanks | Fractional Sizes | 180 Degree Point | Made in the USA
• Our Taper Shank Drills High Speed Steel Black Oxide Drills with conical shanks suitable for direct fitting into tapered holes in machine spindles, driving sleeves or sockets Tapered shank drills generally have a tang.
• These High Speed Steel, Black Oxide drills are made to fit Morse tapered holders, taper shank drills are made to American National Standard dimensions.
• Designed to give maximum performance in drilling many different materials, under a wide range of applications
• Furnished with smaller and larger than American Standard shanks.
• Bright Finish
• High Speed Steel Body
• Carbide Tipped Jobber Drills, Fractional Sizes resist abrasion and retain edge sharpness
• Recommended for drilling in cast iron, aluminum castings, hard plastics and other abrasive nonferrous materials
• Carbide Tipped Jobber Drills, Fractional Sizes should not be used in soft materials
• Allows user to drill through concrete-embedded rebar
• Eliminates need to relocate holes.
• Prevents breaking or shattering of hammer bits
• Use in 1/2" capacity or larger drill motor with a three jaw chuck and no load speed of 440 RPM
118 Degree Point For drilling holes in hard to reach places.
Our Extra Length Drills Bits made from High Speed Steel with a Straight Shank are heavy duty construction for portable or machine drilling in high tensile strength alloy steels. These drills are utilized in deep hole or long reach drilling applications in many kinds of materials for either many kinds of materials for either hand held or fixed spindle use. hand held or fixed spindle use.
• Recommended for drilling in hardened steel and abrasive materials.
• The high rigidity of the drill enables it to drill a close tolerance hole.
• Ideal for drilling materials with short, powdery chips.
• Made in USA.
Number | Bright | 118 Degree Point | Straight Shank
Solid Carbide drills have the ability to retain hardness and a sharp edge at high temperature, plus its excellent abrasion-resistant qualities, makes it advantageous for use in drilling abrasive materials, such as cast iron, the non-ferrous alloys, high silicon aluminum, hard rubber and plexiglass. Carbide drills are generally run at higher speeds than high speed steel drills. They offer the advantage of extreme rigidity for greater drilling accuracy.
Annular Cutters | Fractional Sizes | High Speed Steel
1" Depth Cut | 1-1/4" Diameter | w/Pins, 1“ Depth of Cut, Cutter with Pin
Broach cutting using Drill Bits World 1" Depth Cut, 1-1/4" Diameter Annular Cutters means you can produce large diameter holes efficiently and quickly with less energy, faster penetration and less thrust. Rather than drilling out the metal with a solid drill, Drill Bits World cutters removes only the periphery of the hole, ejecting a slug at the end of the cut. Tests show that a solid drill will take 3 minutes, 45 seconds to drill a 1-1/4 inch hole in 3/4 inch plate.
Aircraft Extension Drills | 6" OAL - Letter Sizes | High Speed Steel
Letter | Black Oxide | 135 Degree Split Point | Straight Shank
Our Aircraft Extension Drill Bits are manufactured to NAS 907 Type C specifications, 135 degree split point, surface treated with jobber flute lengths for drilling holes in hard to reach places. Heavy duty construction for portable or machine drilling in high tensile strength alloy steels.
Micrograin Solid Carbide | Heavy Duty | 118 Degree Split Point | Letter Sizes
• Solid carbide drills offer advantages of greater rigidity and closer tolerance in difficult-to-machine materials
• Withstands high drilling speeds, temperatures and continuous abrasion
• For materials such as cast iron, aluminum casting, non-ferrous alloys, hard plastics, rubber, and other abrasive materials
Aircraft Extension Drills | High Speed Steel | Black Oxide
Wire Sizes | 135 Degree Split Point | Straight Shank
Our Aircraft Extension Drills made from High Speed Steel, Black Oxide that are of Wire Sizes are manufactured to NAS 907 Type C specifications, 135 degree split point, surface treated with jobber flute lengths for drilling holes in hard to reach places. Heavy duty construction for portable or machine drilling in high tensile strength alloy steels.
High Speed Steel, Fractional Sizes, 180 Degree Point, Black Oxide, Made in the USA, Larger Shanks
These Taper Larger Shank Drills Bits are of general purpose design and afford maximum performance under varying conditions and in a wide range of materials. These Taper Larger Shank Drills Bits are furnished with smaller and larger than American Standard shanks.
• Bright Finish
• High Speed Steel Body
• Carbide tipped jobber drills resist abrasion and retain edge sharpness
• Recommended for drilling in cast iron, aluminum castings, hard plastics and other abrasive nonferrous materials
• These Carbide Tipped, Jobber Drills, Letter Sizes, Should not be used in soft materials
Number | Bright | 118 Degree Point | Straight Shank
Solid Carbide drills have the ability to retain hardness and a sharp edge at high temperature, plus its excellent abrasion-resistant qualities, makes it advantageous for use in drilling abrasive materials, such as cast iron, the non-ferrous alloys, high silicon aluminum, hard rubber and plexiglass. Carbide drills are generally run at higher speeds than high speed steel drills. They offer the advantage of extreme rigidity for greater drilling accuracy.
Our High Speed Steel Taper Shank Bridge Reamers are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. High Speed Steel Taper Shank Bridge Reamers have pilot type points for alignment purposes and easy entry into small and off-center holes.
135 Degree Point For drilling holes in hard to reach places.
Our heavy duty construction cobalt extra length drills are for portable or machine drilling in high tensile strength alloy steels. These drills are utilized in deep hole or long reach drilling applications in many kinds of materials for either many kinds of materials for either hand held or fixed spindle use. Hand held or fixed spindle use.
Micrograin Solid Carbide | 140 Degree Split Point | Letter Sizes
• Recommended for drilling in hardened steel and abrasive materials.
• The high rigidity of the drill enables it to drill a close tolerance hole.
• Ideal for drilling materials with short, powdery chips.
• Made in USA.
SDS-Plus Hammer Drills | Carbide Tip | Bright Finish
Fractional | Bright Finish
Chrome Vanadim Steel | HRVCB* 160 Degree Point
New 21th Century Flute design, Self-Centering Tip, Maximized Chip breakup, High resistance reinforced carbide tip, Ground body thermally treated for longer life.
Annular Cutters | Quality High Speed Steel | Fractional Sizes | 2" Depth of Cut | 3/4" Diameter Shank
Broach cutting using Drill Bits World Quality High Speed SteelFractional Sizes Annular Cutters means you can produce large diameter holes efficiently and quickly with less energy, faster penetration and less thrust. Rather than drilling out the metal with a solid drill, Drill Bits World cutters removes only the periphery of the hole, ejecting a slug at the end of the cut. Tests show that a solid drill will take 3 minutes, 45 seconds to drill a 1-1/4 inch hole in 3/4 inch plate. A Drill Bits World cutter can do the same job in 35 seconds.
